 |
 |
A gel stain that includes one
coat of polyurethane. Available in a wide range of colors. Easy to
work with! |
Briwax - natural
beeswax/caraubawax
|
 |
GF
Stains are made from the highest quality oils, resins, and
pigments to insure your finishing project will be an easy and
rewarding experience. As a testimony to the stains'
overall excellence, several woodworking magazines have awarded
GF Stains their highest recommendations in national
competitions. They have been foolproof for over 40 years!
The stain colors are current, exciting and offer you a wide
range of choices: White Mist, Honey, Honey
Maple, Maple, Light Oak, Pecan, Salem, Danish Teak, Candlelight,
Warm Cherry, Antique Cherry, American Walnut, Mahogany, and
Spiced Walnut. |
| The
digitized colors shown below are for reference purposes only.
Please test your stain on a hidden area of the wood to verify
your color choice. |
|
 |
Arm-R-Seal
Urethane Topcoat
Arm-R-Seal topcoats are made with only the highest quality
urethane resin, making them extremely durable and long lasting.
They are formulated to be wiped on
with a cloth or applied with a foam brush, thus eliminating
drips and sags. They penetrate to provide deep down
protection and that " natural" look.
Arm-R-Seal is available in
Satin, Semi-Gloss, and Gloss. |
|
 |
Seal-A-Cell Clear
An unusual combination of oils and urethanes, Seal-A-Cell Clear
for decades has served craftsman as the best way to get the
that "natural" look on beautiful woods that aren't to be
stained. The oils penetrate deep within the wood to
highlight the warm natural look and the urethane insures a deep
hardness. Follow with multiple coats of Arm-R-Seal topcoat.
Seal-A-Cell can be wiped on or applied with a foam brush. |
|
|
The General Finishes
wipe-on Gel Stain line has been formulated to produce a
beautiful hand rubbed finished. These easy to use products
simply wipe on with a rag. There is no messy splashing,
Gel stains produce an even finish on hard to stain woods such as
Aspen, Pine or Maple! |
|
Gel Stains are available in:
Clear, Golden Pine, New Pine, Prairie Wheat Colonial
Maple, American Oak, Antique Walnut, Georgian Cherry (not
shown), Antique Oak, Candlelite, Java, and Nutmeg.
The digitized colors shown are for reference purposes only.
Always test stain on a hidden area of the wood to verify desired
color.Gel Oil Base Top Coat is available in the following
sheens: Satin |
|
|
Danish
oil is unique because its high linseed oil content and its
colorant (gilsonite) allow it to penetrate and color unlike
pigmented stains. Gilsonite is a mined ore, which comes only in
a black walnut color. It is different from pigments, which come
from earth clays. Danish oil's best use is on oak where the
walnut colors are carried deep into the grain and produce a look
that pigments cannot match. |
|
The linseed oil in Danish oil dries
to a durable finish and can be used as a one-can finish; more
coats help build durability. However, for more protection,
Danish oil can be top coated with Prelude or any other high
quality oil based urethane finish. These pure urethanes
penetrate and preserve the natural look as well producing a much
harder finish. Danish Oil is available in the following
colors: Natural, Oak, Light, Medium, and Dark.
|
 |
 |
 |
 |
 |
 |
|
Natural |
Golden Oak |
Honey Oak |
Light Walnut |
Dark Walnut |
Cherry |
|
|
General
Finishes Outdoor Oil is an exterior-rated penetrating linseed
oil. It contains UV stabilizers, mildew prohibitors, and
twice the oil contained in competing brands. We highly
recommend GF Outdoor Oil for all outdoor wood projects,
particularly wood furniture. It can be used by itself,
over any stain, and on pressure treated wood. |
|
Note: When
using oil based finishes, take careful precautions when
disposing of waste products. Rags, steel wool or other
waste soaked with these products may spontaneously catch fire if
improperly discarded. Immediately after use, place
rags, steel wool or waste in sealed, water filled, metal
container. Dispose of in accordance with local fire
regulations. |
|
